{"id":451,"date":"2026-06-30T06:46:13","date_gmt":"2026-06-30T06:46:13","guid":{"rendered":"https:\/\/isbm-technology.com\/?post_type=product&p=451"},"modified":"2026-06-30T07:32:33","modified_gmt":"2026-06-30T07:32:33","slug":"zq40-european-injection-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/isbm-technology.com\/hi\/product\/zq40-european-injection-blow-molding-machine\/","title":{"rendered":"ZQ40 European Injection Blow Molding Machine"},"content":{"rendered":"

<\/p>\n

\n

Introduction to the ZQ40 Injection Blow Molding Machine<\/h2>\n

The ZQ40 is a European-style injection blow molding machine<\/strong> built around a rotary table architecture, purpose-designed for manufacturing hollow plastic containers ranging from small pharmaceutical vials to mid-capacity beverage bottles. Manufactured under the ZI-QIANG brand and distributed through Australia Ever-Power Injection Stretch Blow Moulding Machine Co., Ltd<\/strong> in Sydney, this model occupies a critical middle ground in the production spectrum \u2014 compact enough for lean factory floors, yet robust enough to deliver industrial-grade output around the clock. Its European-style frame carries a 400 KN injection clamping force, which sits 20% to 30% above comparable machines in its class, giving manufacturers a measurable edge in wall uniformity and neck-finish accuracy. Throughout this article, we will walk through the full technical specification sheet, explain the mechanical advantages of its clamping and hydraulic systems, outline mould cavitation options, and clarify where the ZQ40 fits within a broader PET bottle production<\/strong> workflow.<\/p>\n

<\/p>\n

\n

\"ZQ40<\/p>\n

ZQ40 European Injection Blow Molding Machine \u2014 Full European-style frame structure<\/p>\n<\/div>\n

<\/p>\n

Full Technical Specifications of the ZQ40<\/h2>\n

Every purchasing decision starts with numbers. Below is the complete parameter sheet for the ZQ40 injection blow molding machine<\/strong>, extracted directly from the manufacturer data sheet. These values cover the injection system, clamping mechanism, mould dimensions, hydraulic circuit, and auxiliary requirements. Understanding each parameter helps production engineers match the machine to their exact container geometry and throughput targets.<\/p>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Category<\/th>\nParameter<\/th>\nUnit<\/th>\nZQ40 Value<\/th>\n<\/tr>\n<\/thead>\n
Injection System<\/td>\nScrew Diameter<\/td>\nmm<\/td>\n40 \/ 45<\/td>\n<\/tr>\n
Screw L\/D Ratio<\/td>\n–<\/td>\n22:1<\/td>\n<\/tr>\n
Injection Weight<\/td>\ng<\/td>\n190 \/ 260<\/td>\n<\/tr>\n
Heating Power<\/td>\nKW<\/td>\n7.5<\/td>\n<\/tr>\n
Barrel Zones<\/td>\n–<\/td>\n3 + N<\/td>\n<\/tr>\n
Injection Stroke<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Clamping System<\/td>\nInjection Clamping Force<\/td>\nKN<\/td>\n400<\/td>\n<\/tr>\n
Injection Opening Stroke<\/td>\nmm<\/td>\n165<\/td>\n<\/tr>\n
Blowing Clamping Force<\/td>\nKN<\/td>\n60<\/td>\n<\/tr>\n
Blowing Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Rotary Table Lift Height<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n
Mould<\/td>\nMax Platen Size (L x W)<\/td>\nmm<\/td>\n480 x 340<\/td>\n<\/tr>\n
Mold Thickness<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n
Max Bottle Diameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Max Bottle Height<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Suitable Bottle Capacity<\/td>\nml<\/td>\n1 \u2013 1500<\/td>\n<\/tr>\n
Stripping Stroke<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Hydraulic System<\/td>\nHydraulic Pressure<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
Motor Power<\/td>\nKW<\/td>\n11<\/td>\n<\/tr>\n
Dry Cycle<\/td>\ns<\/td>\n3.5<\/td>\n<\/tr>\n
Total Power<\/td>\nKW<\/td>\n20<\/td>\n<\/tr>\n
Operating Efficiency<\/td>\n%<\/td>\n52 \u2013 70<\/td>\n<\/tr>\n
Auxiliary<\/td>\nMin Air Pressure<\/td>\nMPa<\/td>\n0.7 \u2013 1.2<\/td>\n<\/tr>\n
Compressed Air Capacity<\/td>\nm\u00b3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
Water Flowage<\/td>\nm\u00b3\/h<\/td>\n3.5<\/td>\n<\/tr>\n
Cooling Water Pressure<\/td>\nMPa<\/td>\n0.3 \u2013 0.4<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\nm<\/td>\n3.5 x 1.3 x 1.7<\/td>\n<\/tr>\n
<\/td>\nNet Weight<\/td>\nTon<\/td>\n3.8<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The dual screw diameter option (40 mm and 45 mm) is worth highlighting. A 40 mm screw suits lighter containers in the 10 ml to 100 ml range, where precise shot weight control is paramount. Switching to the 45 mm barrel accommodates heavier preforms up to 260 g, opening the door to larger-volume containers without requiring a separate machine. The 22:1 length-to-diameter ratio ensures thorough resin plasticization across both barrel sizes, reducing the risk of unmelted granules reaching the mould cavity.<\/p>\n

<\/p>\n

\n

\"ZQ40<\/p>\n

ZQ40 operating on a factory floor \u2014 compact footprint of just 3.5 m x 1.3 m<\/p>\n<\/div>\n

<\/p>\n

European-Style Clamping System: Why It Matters<\/h2>\n

The clamping unit is arguably the most consequential subsystem on any injection blow molding machine<\/strong>. It determines whether parting lines remain invisible, whether flash is controlled, and whether the mould halves mate with enough force to resist the internal blowing pressure. The ZQ40 takes a distinctly European approach to this challenge, and the mechanical differences are measurable.<\/p>\n

400 KN Injection Clamping Force<\/h3>\n

At 400 KN, the injection-side clamping force of the ZQ40 exceeds comparable machines in the same tonnage class by 20% to 30%. This surplus force is not about brute strength \u2014 it is about maintaining consistent cavity pressure throughout the entire injection and holding phase. When the mould halves are pressed together with greater force, the molten resin cannot push them apart, even at higher injection velocities. The practical result is tighter dimensional tolerances on the preform, which directly translates into more uniform wall thickness after the blowing stage.<\/p>\n

Pressurised Clamping Architecture<\/h3>\n

A unique engineering detail on the ZQ40 is its pressurised clamping structure. In conventional designs, the booster cylinder participates in both the mould-closing stroke and the mould-opening stroke. On the ZQ40, the booster cylinder is isolated from the open-close motion entirely. It engages only during the high-pressure lock phase. This separation has two concrete benefits: first, the open-close cycle runs faster because it moves less hydraulic oil; second, total energy consumption drops by 10% to 20% compared to machines where the booster participates in every stroke. Over a 24-hour production run, that translates directly to lower electricity bills and reduced heat generation in the hydraulic oil, extending oil service intervals.<\/p>\n

<\/p>\n

\n
\n
\u2699<\/div>\n
20\u201330% Higher Clamping Force<\/div>\n
Exceeds industry-standard clamping pressure for tighter dimensional accuracy and reduced flash.<\/div>\n<\/div>\n
\n
\u26a1<\/div>\n
10\u201320% Energy Savings<\/div>\n
Booster cylinder isolation cuts hydraulic oil movement during open-close strokes.<\/div>\n<\/div>\n
\n
\ud83d\udd04<\/div>\n
Standard Servo Rotation<\/div>\n
Simplified mechanical linkage for the rotary table, reducing maintenance points.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Mould Cavitation and Bottle Size Flexibility<\/h2>\n

One of the defining strengths of the ZQ40 ISBM machine<\/strong> is the range of container volumes it handles on a single frame. The platen size of 480 mm x 340 mm supports moulds from micro-volume pharmaceutical vials all the way up to 1000 ml bottles. Cavitation counts vary inversely with container volume \u2014 the smaller the bottle, the more cavities the platen can accommodate, and the higher the output per cycle. Below is the reference cavitation chart provided by the manufacturer.<\/p>\n

<\/p>\n

\n
\n
9<\/div>\n
Cavities<\/div>\n
10 ml<\/div>\n<\/div>\n
\n
8<\/div>\n
Cavities<\/div>\n
30 ml<\/div>\n<\/div>\n
\n
6<\/div>\n
Cavities<\/div>\n
60 ml<\/div>\n<\/div>\n
\n
4<\/div>\n
Cavities<\/div>\n
100 ml<\/div>\n<\/div>\n
\n
3<\/div>\n
Cavities<\/div>\n
250 ml<\/div>\n<\/div>\n
\n
2<\/div>\n
Cavities<\/div>\n
500 ml<\/div>\n<\/div>\n
\n
1<\/div>\n
Cavity<\/div>\n
1000 ml<\/div>\n<\/div>\n<\/div>\n

For pharmaceutical and cosmetics manufacturers producing 10 ml to 60 ml containers, the ZQ40 can run 6 to 9 cavities per cycle, yielding high volumes on a machine that only draws 20 KW of total power. Mid-range beverage producers working with 250 ml or 500 ml formats still achieve 2 to 3 cavities \u2014 more than sufficient for regional distribution or specialty product lines. The 120 mm maximum bottle diameter and 220 mm maximum bottle height cover the vast majority of personal care, household chemical, and small-format food packaging geometries, making this a genuinely versatile blow molding equipment<\/strong> platform.<\/p>\n

<\/p>\n

\n

\"Injection<\/p>\n

Operating principle of the injection blow molding process \u2014 from injection to stripping<\/p>\n<\/div>\n

<\/p>\n

Energy Efficiency and Hydraulic Performance<\/h2>\n

Energy cost is one of the largest recurring expenses in plastic container manufacturing, often exceeding raw material cost over the lifetime of a machine. The ZQ40 addresses this with three interlocking engineering decisions that compound into substantial savings at scale.<\/p>\n

Low Total Power Draw<\/h3>\n

The machine pulls a total of 20 KW across all subsystems \u2014 injection heating (7.5 KW), main motor (11 KW), and controls. At an operating efficiency range of 52% to 70%, the real-world power draw during a typical production cycle falls between roughly 10.4 KW and 14 KW. For a facility running a single ZQ40 for 8,000 hours per year, the annual electricity consumption falls between 83,200 kWh and 112,000 kWh. At an industrial electricity rate of AUD 0.15 per kWh (a reasonable estimate for New South Wales), this translates to an annual power cost between AUD 12,480 and AUD 16,800 \u2014 a fraction of what higher-tonnage machines demand.<\/p>\n

Hydraulic Circuit Design<\/h3>\n

The 14 MPa hydraulic system operates at a moderate pressure ceiling, which reduces wear on seals and valves compared to machines running at 17 MPa or above. Lower system pressure also means less heat generated in the hydraulic oil during each cycle. The cooling water requirement of 3.5 m\u00b3\/h at 0.3 to 0.4 MPa is modest, and the compressed air demand of 0.7 m\u00b3\/min can be supplied by a small screw-type compressor. These auxiliary specifications are deliberately conservative, making the ZQ40 straightforward to integrate into facilities with limited utility infrastructure.<\/p>\n

<\/p>\n

Production Line Integration and Auxiliary Equipment<\/h2>\n

No injection blow molding machine<\/strong> operates in isolation. The ZQ40 is designed as the centrepiece of a complete bottling production line, and understanding the upstream and downstream equipment it pairs with is essential for effective factory planning. Australia Ever-Power offers a range of auxiliary systems that integrate directly with the ZQ40 frame.<\/p>\n

<\/p>\n

\n
\n
1<\/div>\n
\n
Auto Loader<\/div>\n
Feeds PET or PE resin pellets from the storage hopper to the barrel automatically, eliminating manual material handling and maintaining consistent feed rates.<\/div>\n<\/div>\n<\/div>\n
\n
2<\/div>\n
\n
Mould Temperature Controller<\/div>\n
Regulates the mould surface temperature to ensure uniform cooling rates across all cavities, preventing warpage and maintaining optical clarity in transparent bottles.<\/div>\n<\/div>\n<\/div>\n
\n
3<\/div>\n
\n
Chiller Unit<\/div>\n
Supplies chilled water at 0.3 to 0.4 MPa to the cooling circuits, maintaining the 3.5 m\u00b3\/h flow rate the ZQ40 hydraulic and mould systems require.<\/div>\n<\/div>\n<\/div>\n
\n
4<\/div>\n
\n
Screw Air Compressor<\/div>\n
Delivers compressed air at 0.7 to 1.2 MPa for the blowing stage. A capacity of 0.7 m\u00b3\/min is the minimum requirement; pairing with a receiver tank smooths pressure fluctuations.<\/div>\n<\/div>\n<\/div>\n
\n
5<\/div>\n
\n
Bottle Visual Inspection Machine<\/div>\n
Performs automated optical inspection of finished bottles for defects \u2014 wall thinning, contamination, or neck-thread irregularities \u2014 before they move to the packing stage.<\/div>\n<\/div>\n<\/div>\n
\n
6<\/div>\n
\n
Packing Machine<\/div>\n
Collates and packages finished bottles into cartons or shrink-wrap bundles, completing the production workflow from raw resin to shipment-ready product.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

\"Ever-Power<\/p>\n

Australia Ever-Power manufacturing facility \u2014 where ZQ-series machines are assembled and tested<\/p>\n<\/div>\n

<\/p>\n

Industry Applications for the ZQ40<\/h2>\n

The ZQ40 is not limited to a single sector. Its broad cavitation range, moderate clamping tonnage, and ability to process multiple resin types make it relevant across several high-demand packaging verticals. Each application leverages a different aspect of the ZQ40 specification sheet.<\/p>\n

Pharmaceutical and Health Care<\/h3>\n

Small-volume pharmaceutical bottles (10 ml to 100 ml) for syrups, eye drops, and tablet containers benefit from the ZQ40 in two ways. First, the high cavitation count (up to 9 cavities at 10 ml) delivers the volume pharmacological packaging lines demand. Second, the injection blow molding process produces containers with no parting-line seam on the base \u2014 a critical requirement for tamper-evident pharmaceutical packaging where surface irregularities can compromise labelling adhesion. The 400 KN clamping force ensures that neck-finish tolerances remain tight enough for child-resistant closures and dropper inserts.<\/p>\n

Cosmetics and Personal Care<\/h3>\n

Lotion bottles, serum containers, and travel-size shampoo packaging in the 30 ml to 250 ml range are ideal candidates for the ZQ40. The 120 mm maximum diameter and 220 mm bottle height accommodate the tall, slender profiles that cosmetics brands prefer. Optical clarity is another advantage \u2014 the single-stage injection-blow process avoids the reheating step that can introduce haze in clear PET or PETG. For brands requiring frosted, coloured, or pearlescent finishes, the ZQ40 processes masterbatch-blended resins without modification.<\/p>\n

Food, Beverage, and Household Chemicals<\/h3>\n

Condiment bottles, small-format juice containers, and household cleaning product bottles in the 250 ml to 1000 ml range can be produced on the ZQ40 at 1 to 3 cavities per cycle. While the throughput at these volumes is lower than on a dedicated high-speed one-step injection stretch blow molding machine<\/a>, the ZQ40 excels for short-run production, prototype validation, and contract manufacturers who switch between container formats multiple times per week. Its 3.5-second dry cycle keeps changeover downtime minimal.<\/p>\n

<\/p>\n

\n

\"Complete<\/p>\n

Complete production line configuration \u2014 from resin feeding to finished bottle packing<\/p>\n<\/div>\n

<\/p>\n

Why Source Your ISBM Machine from Australia Ever-Power<\/h2>\n

Australia Ever-Power Injection Stretch Blow Moulding Machine Co., Ltd operates from Condell Park, NSW 2200, providing local technical support, spare parts warehousing, and commissioning services for customers across Australia, New Zealand, and the broader Asia-Pacific region. Unlike purchasing directly from overseas manufacturers \u2014 where lead times for parts and after-sales engineering visits can stretch into weeks \u2014 working with a Sydney-based distributor means same-week response on critical components and on-site troubleshooting by engineers who understand both the machinery and the local regulatory environment. The ZQ40 is backed by full documentation, operator training programmes, and mould-design consultation to help buyers achieve optimal cavitation layouts for their specific container geometry. For enquiries, reach the team at sales@isbm-technology.com<\/strong> or through the contact page<\/a>.<\/p>\n

Request a Quote for the ZQ40<\/a><\/div>\n

<\/p>\n

Recommended Product: Fully Servo HGYS150-V4-EV<\/h2>\n
\n
\"HGYS150-V4-EV<\/div>\n

HGYS150-V4-EV: Four-Station Fully Servo ISBM<\/h3>\n

If your production requirements extend beyond the ZQ40 into high-volume PET bottle production<\/strong> with tight energy budgets, the fully servo ISBM machine HGYS150-V4-EV<\/a> is the logical next step. This four-station system replaces hydraulic drives with servo motors on every axis, cutting energy consumption by up to 40% compared to conventional hydraulic platforms. The one-step process \u2014 injection, stretching, blowing, and ejection on a single machine \u2014 eliminates preform storage and reheating, compressing the production chain and reducing floor-space requirements. It is particularly well-suited for PET beverage bottles, wide-mouth jars, and pharmaceutical containers where optical transparency and dimensional precision are non-negotiable.<\/p>\n

View HGYS150-V4-EV Details<\/a><\/div>\n<\/div>\n

<\/p>\n

Frequently Asked Questions<\/h2>\n
\n1. What types of plastic bottles can the ZQ40 injection blow molding machine produce?
\n+<\/span><\/summary>\n
The ZQ40 handles container volumes from 1 ml to 1500 ml, with a maximum bottle diameter of 120 mm and height of 220 mm. It processes PET, PE, PP, and PETG resins, making it suitable for pharmaceutical vials, cosmetics bottles, condiment containers, and small-format beverage bottles. Mould cavitation ranges from 1 cavity (1000 ml) to 9 cavities (10 ml), providing flexibility across short and long production runs.<\/div>\n<\/details>\n
\n2. How does the ZQ40 compare to extrusion blow molding machines?
\n+<\/span><\/summary>\n
Injection blow molding and extrusion blow molding serve different niches. The ZQ40 injection blow molding machine excels at producing containers with precise neck finishes, uniform wall thickness, and no bottom seam \u2014 critical for pharmaceutical and cosmetics packaging. Extrusion blow molding is generally faster for large, simple containers but offers less control over neck-thread tolerances. The ZQ40 also wastes less raw material because there is no flash or tail scrap to trim and regrind.<\/div>\n<\/details>\n
\n3. What is the power consumption of the ZQ40 during normal operation?
\n+<\/span><\/summary>\n
The ZQ40 has a total installed power of 20 KW, with an operating efficiency range of 52% to 70%. This means real-world power draw during production falls between approximately 10.4 KW and 14 KW. The European-style pressurised clamping architecture contributes to the lower end of that range by preventing the booster cylinder from participating in every open-close stroke, reducing hydraulic oil circulation and the associated motor load. Annual energy costs depend on local electricity rates and shift schedules.<\/div>\n<\/details>\n
\n4. What auxiliary equipment is required to run the ZQ40 production line?
\n+<\/span><\/summary>\n
A complete ZQ40 production line typically includes an auto loader for resin feeding, a mould temperature controller, a chiller unit (0.3\u20130.4 MPa water supply), a screw air compressor delivering at least 0.7 m\u00b3\/min at 0.7\u20131.2 MPa, a bottle visual inspection machine, and a downstream packing machine. Australia Ever-Power can supply all ancillary equipment as a turnkey package, with pre-configured connections and unified control wiring.<\/div>\n<\/details>\n
\n5. Can the ZQ40 be used for PET beverage bottle production?
\n+<\/span><\/summary>\n
Yes. The ZQ40 processes PET resin and produces bottles up to 1000 ml with a single cavity, or up to 3 cavities for 250 ml formats. For high-volume PET bottle production where stretch orientation is needed to improve barrier properties and mechanical strength, consider pairing the ZQ40 for smaller-format bottles with a dedicated injection stretch blow molding machine<\/a> for larger beverage runs. The ZQ40 is especially effective for speciality and short-run beverage bottles where changeover speed matters more than raw throughput.<\/div>\n<\/details>\n

<\/p>\n

\n

Australia Ever-Power Injection Stretch Blow Moulding Machine Co., Ltd<\/p>\n

Condell Park, NSW 2200, Sydney, Australia<\/p>\n

Email: sales@isbm-technology.com<\/strong><\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

The ZQ40 European injection blow molding machine features 400 KN clamping force, dual screw options (40\/45 mm), and 1\u20131500 ml bottle capacity with up to 9 cavities per cycle. Engineered for pharmaceutical packaging, cosmetics containers, and food-grade bottle production, it delivers precision neck finishes with 10\u201320% lower energy consumption than conventional systems.<\/p>","protected":false},"featured_media":419,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[23],"product_tag":[],"class_list":["post-451","product","type-product","status-publish","has-post-thumbnail","product_cat-isbm","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/product\/451","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/media\/419"}],"wp:attachment":[{"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/media?parent=451"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/product_brand?post=451"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/product_cat?post=451"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-technology.com\/hi\/wp-json\/wp\/v2\/product_tag?post=451"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}